Tips

Find and update the software version on your Novatel Wireless MiFi 2200

Last Updated: Oct 30, 2015

Just like your computer, your Novatel Wireless MiFi™ 2200 software needs to be updated periodically to make sure you have all the latest fixes and enhancements to keep it running at optimal performance. Follow the steps below to check your current version and perform any needed updates.

Version History

Current Version: Firmware 164

Version

Date released

Description of enhancements/fixes

164 9/17/2010 This update:
- Fixes temporary hot spot failure when clicking on security profile Generate link
- Fixes GPS longitude and latitude values to display correctly and improves to display in ten-thousandths accuracy
- Enhances security

142

10/21/2009

Addresses the following:
- WiFi Channel default has been changed to "Auto"
- Roaming indicator synchronization issue has been resolved
- Nintendo DS and BlackBerry Curve compatibility has been resolved
- Updates to the User Interface include: Sprint only mode support added, allow international access added and enhancements to the roaming indicators text now display properly

133

6/7/2009

Initial release

Check the version on your phone

To find the current firmware version on your MiFi 2200:

  1. Open the Browser Interface, by typing http://192.168.1.1 into the address window of your web browser
  2. Type the administrative password (admin) into the login box in the upper right corner
  3. Select Login
  4. From the Main Menu Bar, select WWAN
  5. Select Diagnostics
  6. The firmware version will be under the WWAN Modem section.

Update your software

To update your MiFi 2200:

Note: It is critical to allow the MiFi 2200 time to download and update the firmware completely; turning off the device during this process may cause permanent damage to the unit.

  1. Open the Browser Interface, by typing http://192.168.1.1 into the address window of your web browser
  2. Type the administrative password (admin) into the login box in the upper right corner
  3. Select Login
  4. From the Main Menu Bar, select WWAN
  5. Select Configuration
  6. Select Update Firmware

Average User Rating
4.2
(27 ratings)

My rating

Contact us

Find a store


Recently Viewed