Tips

Program your BlackBerry Style 9670

Last Updated: Nov 15, 2013

Steps to activate your BlackBerry Style 9670
  • Hands free activation

    If this is the first time activating your device, hands free activation automatically starts when you power it on for the first time.

    1. With your device powered off, press and hold the Power key until the screen turns on.
    2. Your device automatically enters hands free activation mode.
    3. With OK highlighted, press the trackpad.
    4. You've now completed hands free activation.

    Note: If hands free activation fails, continue to the next guide.

  • One touch programming

    If this is not the first time activating your device, or hands free activation did not complete successfully, use one touch programming.

    1. From the home screen, scroll down to the All tray and press the trackpad.
    2. Scroll to Options and press the trackpad.
    3. Scroll to Networks and Connections and press the trackpad.
    4. With Mobile Network highlighted, press the trackpad.
    5. Press the Menu key.
    6. Scroll to Update Profile and press the trackpad.
    7. With OK highlighted, press the trackpad.
    8. Press the End key.
    9. You've now completed one touch programming.

    Note: If one touch programming fails, continue to the next guide.

  • Manual programming

    Only use manual programming if both hands free activation and one touch programming did not complete successfully on your BlackBerry® Style™ 9670.

    Manually programming your device requires a 6-digit programming code and a 10-digit MSID. If your device was activated via www.sprint.com/activate, these codes may be found in the phone activation confirmation email or on the programming instructions page displayed after the activation was processed.

    If this is a new line of service or you don't have these codes, make an appointment at a nearby Sprint Store for assistance getting your device programmed.

    1. From the home screen, press the Send key.
    2. Dial ## followed by the 6-digit programming code. For example, ##123456.
    3. Press the Send key.
    4. On the CDMA Service Edit Screen, replace the existing Mobile Directory Number with the correct the 10-digit phone number (MDN).
    5. Scroll to IMSI_S and enter the 10-digit MSID.
    6. Press the Menu key.
    7. Scroll to Save and press the trackpad.
    8. Your device restarts.
    9. After it restarts, from the home screen, scroll down to the All tray and press the trackpad.
    10. Scroll to Options and press the trackpad.
    11. Scroll to Networks and Connections and press the trackpad.
    12. With Mobile Network highlighted, press the trackpad.
    13. Press the Menu key.
    14. Scroll to Update Profile and press the trackpad.
    15. With OK highlighted, press the trackpad.
    16. You've now completed manual programming.

Be the first to Rate this article

My rating

Contact us

Find a store


Recently Viewed