Tips

Program your HTC EVO 3D

Last Updated: May 16, 2014

Steps to activate your HTC EVO 3D

  • Hands free activation

    If this is the first time activating your device, hands free activation automatically starts when you power it on for the first time.

    1. With your device powered off, press and hold the Power key until the screen turns on.
    2. Your device automatically enters hands free activation mode.
    3. Tap OK.
    4. Your device automatically installs available PRL updates.
    5. Tap OK.
    6. Your device automatically checks for available firmware updates.
    7. Tap Apply if an update is available. Otherwise tap OK.
    8. You've now completed hands free activation.

    After hands free activation completes, continue to the initial sign in and first use.

    Note: If hands free activation fails, continue to the next guide.

  • One touch programming

    If this is not the first time activating your device, or hands free activation did not complete successfully, use one touch programming.

    1. From the home screen, tap the Menu key.
    2. Tap Settings.
    3. Scroll to and tap System Updates.
    4. Tap Update profile.
    5. Tap OK.
    6. After it completes, your device returns to the System updates screen.
    7. Tap the Home key.
    8. You've now completed one touch programming.

    Note: If one touch programming fails, continue to the next guide.

  • Manual programming

    Only use manual programming if both hands free activation and one touch programming did not complete successfully on your HTC EVO™ 3D.

    Manually programming your device requires a 6-digit programming code and a 10-digit MSID. If your device was activated via www.sprint.com/activate, these codes may be found in the phone activation confirmation email or on the programming instructions page displayed after the activation was processed.

    If this is a new line of service or you don't have these codes, make an appointment at a nearby Sprint Store for assistance getting your device programmed.

    1. From the home screen, tap the Phone icon.
    2. Dial ## followed by the 6-digit programming code followed by #. For example, ##123456#.
    3. Tap Edit Mode.
    4. Tap Mobile Directory Number (MDN).
    5. Enter the 10-digit phone number (MDN).
    6. Tap OK.
    7. Tap MSID.
    8. Enter the 10-digit MSID.
    9. Tap OK.
    10. Tap the Menu icon.
    11. Tap Commit Modifications.
    12. Your device restarts.
    13. After it restarts, from the home screen, tap the Menu key.
    14. Tap Settings.
    15. Scroll to and tap System Updates.
    16. Tap Update Profile.
    17. Tap OK.
    18. After it completes, your device returns to the System updates screen.
    19. Tap the Home key.
    20. You've now completed manual programming.
  • Device reset

    Only reset your device if it was previously active using a different phone number (MDN).

    Resetting your device requires a 6-digit programming code. If your device was activated via www.sprint.com/activate, this code may be found in the phone activation confirmation email or on the programming instructions page displayed after the activation was processed.

    If this is a new line of service or you don't have this code, make an appointment at a nearby Sprint Store for assistance getting your device programmed.

    1. From the home screen, tap the Phone icon.
    2. Dial ##72786#.
    3. Enter the 6-digit programming code.
    4. Tap OK.
    5. Tap the Menu icon.
    6. Tap Reset.
    7. Tap OK.
    8. Your device restarts.
    9. After it restarts, your device is ready to be used.
    10. You've now reset your device.

Average User Rating
4.0
(1 ratings)

My rating

Contact us

Find a store


Recently Viewed