Tips

Program your Motorola Renegade V950

Last Updated: Nov 18, 2013

You can use these programming instructions if you have a new phone or a used phone activated by a previous owner, and you have completed the Activate your new phone process in My Sprint. If so, you should refer to the page you printed showing the codes you need for these instructions to work.

To program your phone:

NOTE: If you have already entered the MEID in the Activate your new phone page online, skip to Step 2.

  1. Find the Mobile Equipment Identification Number (MEID) on your phone. You can find it in two places:
    • Underneath the battery in the phone on the right side of the barcode sticker: Turn off the phone and remove the battery to view. After viewing, place the battery back into the phone.
    • The barcode sticker on the end of the original box: Labeled DEC-HEX.
  2. If necessary, turn your phone on by pressing and holding the red Power/End key. The device will power on and perform a hands-free activation. This may take a few minutes.
  3. When you receive the activation completed message on your phone, press the Menu/OK key to reset. The phone is now ready for voice and data use.

Follow the steps below if you receive the following message: Your activation could not be completed. Please try again later.

  1. Press the Menu/OK key to access the main menu, and then select Settings.
  2. Select More > Data > Update Data Profile.
  3. Turn the phone off, and then turn it back on again.

    If the phone is still not working, continue with the next step.

  4. If you have a new phone that has never been activated, follow the instructions below:
    • Press ## followed by the one-time 6-digit code, located in the Programming Instructions section on the Activate your new phone page, followed by an additional #. (Example 6-digit code: ##123456#. The last # entered will not show on the display.)
  5. If you have a previously activated phone, one that is new to you but not brand new, follow the instructions below:
    • Press ## followed by the secondary 6-digit code, located in the Programming Instructions section on the Activate your new phone page, followed by an additional #. (Example 6-digit code: ##123456#. The last # entered will not show on the display.)
  6. In the MDN Service Program screen, select Edit.
  7. Enter your 10-digit phone number from the Programming Instructions section on the Activate your new phone page and select OK.
  8. Enter the 10-digit MSID number from the Programming Instructions section on the Activate your new phone page and select OK.
  9. Select Done. The phone will automatically turn off and then turn back on again. After the phone restarts, programming will be complete.
  10. Once programming is complete, press the Menu/OK key to access the main menu, and then select Web to complete the activation of the Web service.

NOTE: It can take up to four hours to complete the activation process and for your phone to begin working. If the provisioning process does not complete within 5 hours, contact us.

NOTE: Once activation is complete, check the Software Downloads page for free software updates.

Average User Rating
3.2
(5 ratings)

My rating

Contact us

Find a store


Recently Viewed

Recent discussions

jcmusc wrote: Im not that tecky, What is anMRL # And where do i find it? MSL = Master Subsidy Lock Code; A numeric code
Author: Levi4u Date: 2009-03-13