Tips

Program your PRO-700 by Sanyo

Last Updated: Nov 18, 2013

You can use these programming instructions if you have a new phone or a used phone activated by a previous owner, and you have completed the Activate your new phone process in My Sprint. If so, you should refer to the page you printed showing the codes you need for these instructions to work.

To program your phone:

  1. If necessary, press and hold the red End key to turn on the phone.
  2. Press the Menu/OK key.
  3. Select Settings > More > Data, and then select Update Profile. The following message appears: The network is preparing your services. Please wait.
  4. When the message Device Configuration has completed appears, press the left softkey to select OK.
  5. Press and hold the End key to turn off the phone.
  6. Turn the phone back on. The phone is ready to make voice, data and Direct Connect® calls.

    If the phone is still not working, continue with the next step.

  7. If you have a new phone that has never been activated:
    • Press ## and enter the one-time 6-digit code from the Programming Details section of the Activate your new phone page, and then press # again. The last # will not show on the screen. Example: ##123456
  8. If you have a used phone that has previously been activated:
    • Press ## and enter the secondary 6-digit code from the Programming Details section of the Activate your new phone page, and then press # again. The last # will not show on the screen. Example: ##123456
  9. In the MDN Service Program screen, select Edit.
  10. Enter your 10-digit phone number from the Programming Information section of the Activate your new phone page and select OK.
  11. Enter the 10-digit MSID number from the Programming Information section of the Activate your new phone page and select Done. The phone will automatically turn off and then turn back on again.
  12. Once activation is complete, press the Web key located above the green Talk key to complete the activation of the Web and Nextel Direct Connect® service.

Note: It can take up to 4 hours to complete the activation process and for your phone to begin working. If the provisioning process does not complete within 5 hours, contact us.

Average User Rating
2.7
(3 ratings)

My rating

Contact us

Find a store


Related Topics

Recently Viewed

Recent discussions

Well, in my experience the Blackberry Style supports this feature over Bluetooth and over USB only with Blackberry Deskt
Author: MICHAELKELSEY01 Date: 2011-07-02