Tips

Program your Sprint Phone Connect 2

Last Updated: Nov 15, 2013

Steps to activate your Sprint Phone Connect 2

Before completing these steps, ensure that the following conditions are met:

  1. The battery is installed in your Sprint Phone Connect 2.
  2. The included antenna is attached to your Sprint Phone Connect 2.
  3. A land-line handset is connected to the RJ11 port on your Sprint Phone Connect 2.
  4. The power supply is connected to your Sprint Phone Connect 2.
  • Hands Free Activation

  • If this is the first time activating your device, Hands Free Activation automatically starts when you power it on for the first time.

    1. With your device powered off, press and hold the Power key until the power indicator turns on.
    2. Wait 3-5 minutes for Hands Free Activation to complete.
      • Note: The Power, Signal, and Signal Strength LEDs blink left to right during Hands Free Activation
    3. After Hands Free Activation completes, the LEDs turn off and then come back on.
    4. You've now completed hands free activation.
  • Reprogramming

  • Reprogram your Sprint Phone Connect 2 if it was previously programed.

    1. With your device powered off, press and hold the Power key until the power indicator turns on.
    2. Using the connected handset, quickly dial ##786#.
    3. The LEDs turn off and Hands Free Activation begins.
    4. Wait 3-5 minutes for Hands Free Activation to complete.
      • Note: The Power, Signal, and Signal Strength LEDs blink left to right during Hands Free Activation
    5. After Hands Free Activation completes, the LEDs turn off and then come back on.
    6. You've now reprogrammed your Sprint Phone Connect 2.

If you are having any difficulty with activation, make an appointment at a nearby Sprint Store for assistance getting your device programmed.

Be the first to Rate this article

My rating

Contact us

Find a store


Recently Viewed