Tips

Program your Treo 700p by Palm

Last Updated: Nov 18, 2013

You can use these programming instructions if you have a new phone or a used phone activated by a previous owner, and you have completed the Activate your new phone process in My Sprint. If so, you should refer to the page you printed showing the codes you need for these instructions to work.

  1. Find the serial number on your phone. This appears in three places:
    • By the barcode sticker on the end of the box, labeled ESN or MEID.
    • Underneath the battery in the phone, below the first bar code, labeled MEID HEX.
    • You can also find this information after powering on the device by going to the dial pad. Press Phone button, press the right softkey to select Menu, select Options, and then select Phone Info. The MEID number is listed on the first screen labeled MEID.
  2. If the phone is off, press and hold the Power/End button to turn the phone on.
  3. Press the Phone button one time to display the dial pad.
  4. If you have a new phone, one that has never been activated, follow the instructions below:
    • Using the stylus, tap ## followed by the one-time 6-digit code, located in the Programming Instructions section on the Activate your new phone page, followed by an additional #. (For example ##123456#. The # key is located on the B key. This will take you to the Activating Your Phone menu.)
  5. If you have a previously activated phone, one that is new to you but not brand new, follow the instructions below:
    • Using the stylus, tap ##, followed by the secondary 6-digit code, located in the Programming Instructions section on the Activate your new phone page, followed by an additional #. (For example ##123456#. The # key is located on the B key. This will take you to the Activating Your Phone menu.)
  6. Tap the EDIT button on the display screen to select the Mobile Number text box.
  7. Using the QWERTY keyboard, enter the 10-digit phone number (MDN), located on the Programming Instructions section on the Activate your new phone page. There is no need to hold down the number lock key; the text box defaults to numbers.
  8. Tap the Entry text box, next to the MIN text box, twice. It will become yellow, indicating that it can be edited.
  9. Using the QWERTY keyboard, enter the 10-digit MSID, located in the Programming Instructions section on the Activate your new phone page. There is no need to hold down the number lock key; the text box defaults to numbers.
  10. Select Save. An Activation Complete message appears.
  11. Tap the OK dialog box located at the bottom left of the display screen. A Please Wait message appears.

NOTE: It can take up to four hours to complete the activation process and for your phone to begin working. If the provisioning process does not complete within five hours, contact us.

Average User Rating
4.3
(35 ratings)

My rating

Contact us

Find a store


Recently Viewed

Recent discussions

I support just about every type of messaging phone from BB, to smartphones like the Q and blackjack to Palm phones like
Author: boe_d Date: 2007-03-11