Tips

Troubleshoot issues related to data connectivity and your Sanyo Vero

Last Updated: May 16, 2014


This article helps you troubleshoot data connectivity issues on your Sanyo Vero.

You may have data connectivity issues if you're unable to:
  • Connect to the Internet
  • Browse websites
  • Send or receive multimedia messages
  • Load Internet content within applications
  • Send or receive email

These steps help identify and resolve the underlying cause. After completing each step, test to see if the issue is fixed. If not, continue to the next step.

  1. Verify your Sanyo Vero™ is connected to the Sprint network using the web browser.

    Be sure mobile data is enabled. Some features and applications require a data connection to work properly.

    1. From the home screen, press the OK/MENU key.
    2. Scroll to Web and press the OK/MENU key.
    3. Try to browse to a web page.
    4. If the data connection fails, update the profile.
    5. Test your device to see if the issue is resolved.

  2. Perform a soft reset.

    A soft reset reconnects your Sanyo Vero to the Sprint network.

    1. Press and hold the Power key to turn your Sanyo Vero off.
    2. Remove the battery. After 30 seconds, reinsert the battery.
    3. Press the Power key to turn your Sanyo Vero back on.
    4. Test your phone to see if the issue is resolved.

  3. Do you know if other Sprint customers are experiencing the same problem in the same location?

    • If yes or you don't know: Please contact Sprint Customer Care for help.
    • If no: Please find the nearest Sprint Repair center and schedule an appointment so a Sprint technician can further diagnose the issue.

Note: To optimize device performance, be sure your Sanyo Vero is running the most recent device software. Check for software updates.

If you're still having issues, please contact Sprint Customer Care for more help.

Be the first to Rate this article

My rating

Contact us

Find a store


Recently Viewed