You may have this issue if your LG Viper™ 4G LTE:

• Doesn't turn on
• Starts to turn on but restarts or shuts down before it turns on completely

Try each of these steps if your phone doesn't turn on.

1. Verify that your LG Viper 4G LTE has a sufficient charge.

   1. Connect your original charger to your phone.
   2. After a few minutes, try to turn on your phone.

2. Verify that your phone, charging port, and battery contacts are not damaged.

   1. Carefully inspect your phone to be sure it's not overheating, swollen or damaged.
   2. Carefully inspect your phone's charging port and remove any debris.
   3. Remove the battery.
   4. Carefully inspect and clean the gold contacts using a cotton swab or dry soft cloth.

   Caution: If your phone is damaged, do not complete the remaining steps in this guide. Make an appointment at a convenient Sprint Repair center.

3. Verify that you are using a compatible charger.

   You risk severe damage to your phone if the charger isn't the same voltage, amps, and plug type as your original charger. You can purchase compatible chargers on sprint.com and at any Sprint Store.

4. Verify that your LG Viper 4G LTE can power on.

   1. Turn your phone on.
   • If your LG Viper 4G LTE doesn't turn on, make an appointment at a convenient Sprint Repair center.

5. Verify that your LG Viper 4G LTE is running the most recent software.

   1. From Device Diagnostics, tap System Updates.
   2. Tap Device Software.
   3. Tap Check now.
   • If an update is available, follow the prompts to install.

If you're still having issues, try the Sprint Community pages or make an appointment at a convenient Sprint Repair center.